Will Upgrading Firmware On Netgear Ac1600 Router Fix Drop Dropouts

If your Netgear router keeps dropping WiFi constantly no affair what yous practice, we may accept a suitable solution for you!

Since many users are complaining of their Netgear router often dropping connections at that place are many solutions available and we're about to share them all with you!

The reason backside your Netgear router outages might be outer interference, network overloading, outdated firmware, or inappropriate WiFi settings. To fix your network you can restart the router, change WiFi channels, update the firmware or perform a manufactory reset.

Before we jump into the solutions, let's first take a look at some possible causes and how to avoid them.

Why Router Keeps Dropping Wifi On Netgear?

Some causes might crave advanced troubleshooting while others simply need your attending.

Let's accept a look at the about frequently reported causes when information technology comes downward to Netgear WiFi outages.

i. Temporary Glitch

WiFi connectedness often gets impacted by long device up-time. All users should perform a maintenance router restart every week.

2. Device out of Range

If your device is out of range from your router's coverage, you'll constantly experience network outages.

3. External Interference

Big metal objects or electronic devices nearby your router can disrupt the WiFi transmission.

4. Router'southward Issue

It could be a hardware issue every bit a result of physical damage, dust, or overheating. On the other hand, the problem could be software-based and hands resolvable.

At present that you know what might have gone wrong with your network, let'due south keep with the near constructive troubleshooting methods. Based on the user'southward stance we've managed to put them all together in ane ultimate guide.

How To Fix Netgear Router Keeps Dropping WiFi Outcome?

It is suggested that you first endeavor to restart your router. With a little luck, this would be all you need to fix your WiFi.

On the other hand, it is recommended to call your supplier to cheque for maintenance, and so you won't waste your time troubleshooting if the issue is non on your side.

Once you are fix with the grooming, let'due south start with the easiest arroyo:

Method #one Ensure Your Device Is In Range

If you're not using a PC where you lot have established your router, so improve brand sure that your device is in range with the network.

Otherwise, you lot will lose connection every time you step out of the network coverage, which could be abrasive at some betoken.

If you lot're feeling like your network's coverage is shrinking over time, then you should probably check the antennas of your Netgear router. They could have fallen all the mode to the floor, which will ultimately reduce the range yous volition be getting continued in.

          The best mode to justify this would be to stand right next to your router and test your WiFi.

If information technology'southward better then yous're either too far away or using a 5Ghz network, which hardly travels through more than 1 wall. In that case, y'all can try switching to the 2.4Ghz WiFi.

Method #2 Ensure Nothing Is Blocking the Point

When your Netgear router keeps losing WiFi, it could be an object constantly interfering with the network.

For case, if you accept your router placed on the floor of your household, so whatsoever large metal object, especially electronic devices could interrupt the WiFi.

To set that outcome, try moving the objects away to see if the outages will cease. If they practice, so you might have to consider placing the objects elsewhere, to prevent the signal from being cutting off again.

          Note:          Fifty-fifty if placed on top of your desk-bound, the router's connection can be blocked besides by any object overlapping your router.

Method #3 Disable Guest Network Feature

Another thing that could cause constant WiFi outages is the guest networks existence enabled.

If you dig into the community and non but Netgear'due south, you will accept to find out that ghost networks are the cause of constant WiFi outages likewise every bit slow internet and other problems.

You lot may accept accidentally enabled these features while establishing the router, so here are the steps to how to disable them:

First, go to the router login page, found at http://www.routerlogin.com/net.
Enter the control panel using your Netgear business relationship.
Click Wireless located under the Basic tab.
Articulate the enable SSID Circulate feature checkmark.
Ostend by clicking on Apply.

Now, power cycle your router by unplugging it from the power for about three minutes and test for network outages.

Method #4 Disable VPN

The whole trouble might Not be in your Netgear router, instead, you lot might have VPN installed on your device.

The VPN software basically changes your IP every couple of minutes and depending on the land it chooses your network packages have to go there and and so return to your home.

For case, if your IP is masked and has to travel long-distance back and along the time information technology requires will be a downtime (outage) on your side.

Brand sure to remove whatever VPN software earlier nosotros go on whatever further as nosotros're taking this troubleshooting ane step farther.

Method #5 Update Netgear Router

Sometimes whenever there is an update pending, your router may oftentimes lose WiFi connection until information technology is updated. You can check and update the current version through the provided past the manufacturer'due south Netgear app or within the control panel

How Do I Get The Netgear App?

The Netgear app can be downloaded from the App Store for iPhones and the Google Play Store for Androids.

If yous're wondering how it is going to detect your router, y'all simply have to enable the Bluetooth on your phone and hover your device over the router.

This should make your router pop up in the app and once you lot click it, both of the devices will connect with each other.

Once you've got the app follow the steps below:

Open the Netgear app.
Log on using your Netgear account information.
Go to Carte > Settings > Firmware Version.
Choose Firmware Update.
Nextselect Check For Updates.

          Note:          If you don't have an account yous can accomplish out to Netgear customer service to assist y'all with its establishment.

In one case you've checked for updates, if there is any firmware update bachelor it should appear.

Don't hesitate to download and install correct abroad. When ready your router will restart and you should be able to exam for WiFi outages.

Method #6 Manufacturing plant Reset

If your Netgear router keeps dropping connexion even afterwards updating its firmware, then it's time to perform a factory reset. This will erase all settings, configurations, and data from your router.

The simply thing yous'll need to ready for would exist to configure your WiFi networks from scratch. In that regard, nosotros recommend saving all settings by taking images of how your WiFi is currently configured.

Hither is how to manufactory reset the Netgear router via the control panel and recover your WiFi settings:

Open your internet browser:
Paste routerlogin.internet into the search field and hitting Enter.
Log in using your Netgear account.
Go to Advanced Settings.
Become to Network Settings.
Choose WiFi and select a network.
Take an paradigm of ALL WiFi settings.
Go to the Reset tab.
Choose Reset to factory settings.

Your Netgear router will now restart and recover to manufactory default settings. Once ready, reach inside the control panel and configure your WiFi networks from scratch using the backup images you've taken.

          Note:          If you have a hard fourth dimension configuring your WiFi, you tin contact Netgear client service for help.

When ready y'all can connect your device and exam for outages.

Method #seven Change WiFi Channels

If you didn't know, some routers emit more than than one WiFi. For example, you could have a 2.4Ghz network as well as 5Ghz. Each WiFi network uses its own network channel.

Whenever a channel is overwhelming all WiFi inside it might have interruptions.

Luckily, when you're in the Netgear control panel you tin go to WiFi networks, choose which network yous want to configure, and modify the aqueduct.

In that location is a fiddling drop-downwardly menu that volition allow yous to alter the channel and restart the router subsequently.

Selection whatever channel, it actually does not matter as long as you change it. If the outages are still there, attempt another aqueduct, and hopefully, yous'll see a change.

To fix constant WiFi outages from your Netgear router, yous tin try power cycling the device, disabling the guest network feature, and keeping your device'south inconsiderable altitude from the router. You can likewise update, reset and even alter your WiFi channel to resolve network outages.

Read Side by side: Why Does Netgear Router Reset Itself?

Bottom Line:

Now that you know why the Netgear router keeps dropping WiFi, using our methods you should be able to resolve the issue at home.

Even if you're yet non able to fix your trouble you can always achieve out to Netgear customer service for additional assist.

If you're looking towards more than helpful posts related to Netgear router's bug, yous will definitely observe answers in our blog so don't miss information technology out!

Kevin has over five years of feel working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.