How To Fix A Squeaking Hp Printer

Consequence clarification

The printer is making a squeaking or 'chirping' type noise. The noise can occur every time you use the printer or the racket can occur intermittently.

Possible causes

The noise tin can be caused by whatever one of the post-obit:

• A piece of paper is stuck on one of the rollers within the printer.
• A roller in the toner cartridge is squeaking.
• A roller on a newspaper feed option is squeaking.
• A roller inside the base printer is squeaking.

Solution

Index of recommended solutions:

• Wait for a small slice of newspaper stuck within the printer
• Attempt a different toner cartridge
• Remove any installed paper feed options
• Narrowing the source of the noise to a specific feed option

Wait for a pocket-sized slice of paper stuck inside the printer

1. Power off the printer.



2. Open up the front end and rear doors/covers.



3. Remove the toner cartridge.



4. Look for any jammed paper or other obstructions caught inside the printer. Remove any items you notice.



5. If the paper path inside the printer is clear, closely examine the inside area for whatsoever minor pieces of paper still stuck somewhere.

   Note: Pay close attention to the rollers inside the printer. If a pocket-sized slice of paper or other item wraps around a roller, it can cause a squeaking noise to occur.



6. Cheque the condition of the toner cartridge.

   • If the cartridge appears fine, reinsert it into the printer.
   • If the cartridge appears damaged in whatever way, attempt installing a different toner cartridge.

   Note: If y'all do not have some other cartridge available, yous tin can endeavour a working toner cartridge from another Lexmark printer of the same model as a examination.



7. Remove all the installed paper trays. Make sure the stack of paper in each tray is loaded correctly and is not above the 'full' line.



8. Reinstall all trays and close all doors/ covers. Power on the printer and try printing over again.

Try a different toner cartridge

1. If the noise continues, endeavour installing a different toner cartridge.

   Note: If you do not accept some other new cartridge available, you can try a working toner cartridge from another Lexmark printer of the same model as a test.



2. Impress 10 to twenty pages to come across if the squeaking dissonance continues.

   • If the squeaking noises proceed, skip ahead to 'Remove any installed newspaper feed options' below.
   • If a unlike toner cartridge corrects the consequence, continue using the printer with this toner cartridge for another couple of days. If the racket does not return after that, the printer is fine and the problem is with the kickoff cartridge. Please carry out the following checks on that cartridge:
   • Ostend that you are using an original Lexmark brand toner cartridge. If a third-political party cartridge is causing this issue, please contact the betoken of purchase to have the cartridge replaced.
   • Confirm that the toner cartridge has not been refilled or reworked in any fashion. Refilling the toner cartridge tin damage it, leading to issues of this kind. If the cartridge has been refilled or reworked, contact the place where it was refilled to have it replaced.
   • If this is an original Lexmark toner cartridge, inspect information technology for whatever damage or defects. If you notice any damage to the cartridge or loose parts on it, please contact Lexmark Technical Back up. The cartridge may be eligible for replacement, depending on how old or used it is.

   Note: If the toner cartridge does non appear to be damaged, but is relatively new or unused, it may still exist eligible for replacement. Please contact the signal of purchase first equally they may accept a replacement policy. If the cartridge was purchased directly from Lexmark, contact Lexmark using the phone number or address you lot used to gild the cartridge.

Remove any installed paper feed options

1. If the dissonance continues, remove whatever installed paper feed options. This would include any optional paper trays (A), a duplex option (B), and whatever exit feed options (C).

   

   CAUTION—POTENTIAL INJURY: You volition need to lift the printer in order to remove the duplex pick or any of the paper trays, and so seek additional help when performing this step. This is considered an "advanced" procedure, but it tin can be performed by a customer. However, if you experience uncomfortable about carrying out this process yourself, please contact Lexmark Technical Support for additional assistance.'



2. Afterwards you lot have removed all newspaper feed options, power on the printer and try printing once again.

   • If the noise continues on more than one toner cartridge and with no paper feed options installed, the crusade of the dissonance is likely a roller inside the base of operations printer. This requires service to correct the issue.
   • If the dissonance stops subsequently all feed options are removed, the source of the dissonance is likely a roller within one of the feed options. That detail feed option must be repaired or replaced.

   Note: You tin can run the base printer without any paper feed options installed as a temporary fix. You can also try to narrow the source of the problem to a specific feed option. For directions on that, run into 'Narrowing the source of the noise to a specific feed pick' section.

Narrowing the source of the noise to a specific feed option

Notation: Performing the steps below involves lifting the printer to install and swap out paper feed options. If you lot feel uncomfortable about conveying out this procedure by yourself, or if you accept questions most whatever of the steps involved, please contact Lexmark Technical Back up for additional assistance.

1. Power off the printer.



2. Add each paper feed option, ane at a time, dorsum onto the printer.



3. Each time you add an option, ability on the printer and try printing over again.



4. Continue this pattern of powering off the printer, calculation an choice, and then powering on the printer and printing, until the noise returns.

   Annotation: If you can reinstall all options and the noise does not return, one of the options may just have been loose. Proceed using the printer, but notice it closely for the next week or two to see if the noise returns.



5. If the racket returns when you lot install a item choice, the source of the racket is likely a roller within that pick or a part on the printer where the printer connects to the option.

   Notation: To further diagnose if the base printer or the option is the source of the noise, try swapping out the paper feed option that directly connects to the printer. If the noise occurs with two different options, the source of the dissonance is probable a part on the base of operations printer.

How To Fix A Squeaking Hp Printer,

Source: https://infoserve.lexmark.com/ids/ifc/ids_topic.aspx?root=kb20220203102749873&topic=SO4137&productCode=Lexmark_X646&loc=en_IN

Posted by: wilsongeody1976.blogspot.com

Share this post